CRF Publications

  • R. N. Dahms and J. C. Oefelein, “Liquid jet breakup regimes at supercritical pressures,” Combust. Flame (2015). Accepted for publication.
  • Barlow, R.S., Dunn, M.J., Magnotti, G. “Preferential transport effects in premixed bluff-body stabilized CH4/H2 flames.” Combust. Flame, 2015 162:727-735.
  • Beresh, S., Wagner, J, Pruett, J., Henfling, J. and Spillers, R. “Supersonic Flow over a Finite-Width Rectangular Cavity.” AIAA Journal, 53(2), 2015: 296-310.
  • Bhagatwala, A., Zhaoyu L., Shen, H., Sutton, J.A., Tianfeng L., and Chen, J.H. “Numerical and Experimental Investigation of Turbulent DME Jet Flames.” Proceedings of the Combustion Institute, 2015 35(1): 1157-1166.
  • Bierkandt, T., Kasper, T., Akyildiz, E., Lucassen, A., Oßwald, P., Köhler, M., and Hemberger, P. “Flame Structure of a Low-Pressure Laminar Premixed and Lightly Sooting Acetylene Flame and the Effect of Ethanol Addition.” Proceedings of the Combustion Institute, 2015 36(1): 803-811.
  • Blessinger, M., Manin, J., Skeen, S.A., Miejer, M., Parrish, S., Pickett, L.M. “Quantitative Mixing Measurements and Stochastic Variability of a Vaporizing Gasoline Direct-Injection Spray.” International Journal of Engine Research, 2015 16(2): 238-252.
  • Bohlin, A., Mann, M., Patterson, B.D., Dreizler, A., and Kliewer, C.J. “Development of Two-Beam Femtosecond/Picosecond One-Dimensional Rotational Coherent Anti-Stokes Raman Spectroscopy: Time-Resolved Probing of Flame Wall Interactions.” Proceedings of the Combustion Institute, 2015 35(3): 3723-3730.
  • Boriton, B., Zendehdel, M., Ukai, S., Kronneburg, A., Stein, A.T., Im, S.-K., Gamba, M., and Frank, J.H. “Imaging measurements and LES-CMC modeling of a partially-premixed turbulent dimethyl ether/air jet flame.” Proceedings of the Combustion Institute, 2015 35: 1251-1258.
  • Busch, S., Zha, K., and Miles, P.C. “Investigations of closely coupled pilot and main injections as a means to reduce combustion noise in a small-bore direct injection Diesel engine.” International Journal of Engine Research, January 2015 16: 13-22
  • Casper, K., Wagner, J., Beresh, S., Henfling, J., Spillers, R. and Pruett, B. “Complex Geometry Effects on Cavity Resonance.” AIAA Journal, February 2015.
  • Coriton, B., Frank, J.H. “High-Speed Tomographic Piv Measurements of Strain Rate Intermittency and Clustering in Turbulent Partially-Premixed Jet Flames.” Proceedings of the Combustion Institute, 2015 35(2): 1243-1250.
  • Coriton, B., Zendehdel, M., Ukai, S., Kronenburg, A., Stein, O.T., Im, S.-K., Gamba, M., and Frank, J.H.  “Imaging Measurements and LES-CMC Modeling of a Partially-Premixed Turbulent Dimethyl Ether/Air Jet Flame.” Proceedings of the Combustion Insitute, 2015 35(2): 1251-1258.
  • Dahms, R.N., and Oefelein, J.C. “Non-Equilibrium Gas–Liquid Interface Dynamics in High-Pressure Liquid Injection Systems.” Proceedings of the Combustion Institute, 2015 35(2): 1587-1594.
  • Dahms, R.N. “Gradient Theory simulations of pure fluid interfaces using a generalized expression for influence parameters and a Helmholtz energy equation of state for fundamentally consistent two-phase calculations.” Journal of Colloid and Interface Science, 2015 445: 48-59.
  • Dahms, R., and Oefelein, J.C. “Analysis of atomization and dense fluid breakup regimes in liquid rocket engines.” J. Prop. Power.
  • Dec, J.E. “Advanced Compression-Ignition Combustion for High Efficiency and Ultra-Low NOX and Soot.” Encyclopedia of Automotive Engineering, 2015: 267-306.
  • Dec, J., Yang, Y., Ji, C., and Dernotte, J. ” Effects of Gasoline Reactivity and Ethanol Content on Boosted, Premixed and Partially Stratified Low-Temperature Gasoline Combustion (LTGC).” SAE, January 2015.
  • Dernotte, J., Dec, J.E., Ji, C., “Energy Distribution Analysis in Boosted HCCI-like / LTGC Engines – Understanding the Trade-offs to Maximize the Thermal Efficiency.” SAE, January 2015.
  • Dodson, L.G., Shen, L., Savee, J.D., Eddingsaas, N.C., Welz, O., Taatjes, C.A., Osborn, D.L., Sander, S.P., and Okumura, M. “VUV Photoionization Cross Sections of HO2, H2O2, and H2CO.” Journal of Physical Chemistry, 2015 119(8): 1279.1291.
  • Ekoto I.W., Blaylock M.L., LaFleur A.C., Horne D.B. “Analyses in Support of Risk-Informed Natural Gas Vehicle Maintenance Facility Codes and Standards.” Fire Technology, (submitted).
  • Ekoto, I.W., Skeen, S.A., Steeper, R.R., Hansen, N.P. “Detailed characterization of negative valve overlap chemistry by molecular-beam mass spectrometry.” JSAE, 2015.
  • Eskola, A.J., Welz, O., Zádor, J., Antonov, I.O., Sheps, L., Savee, J.D., Osborn, D.L., and Taatjes, C.A. “Probing the Low-Temperature Chain-Branching Mechanism of N-Butane Autoignition Chemistry Via Time-Resolved Measurements of Ketohydroperoxide Formation in Photolytically Initiated N-C4H10 Oxidation.” Proceedings of the Combustion Institute, 2015 35(1): 291-298.
  • Fansler, T.D., Reuss, D.L., Sick, V., and Dahms, R.N. “Combustion instability in spray-guided stratified-charge engines.” Intl. J. Engine Res., 2015.
  • Felsmann, D., Moshammer, K., Krüger, J., Lackner, A., Brockhinke, A., Kasper, T., Bierkandt, T., Akyildiz, E., Hansen, N., Lucassen, A., Oswald, P., Köhler, M., Garcia, G.A., Nahon, L., Hemberger, P., Bodi, A., Gerber, T., and Kohse-Höinghaus, K. “Electron Ionization, Photoionization and Photoelectron/Photoion Coincidence Spectroscopy in Mass-Spectrometric Investigations of a Low-Pressure Ethylene/Oxygen Flame.” Proceedings of the Combustion Institute, 2015 35(1): 779-786.
  • Fuest, F., Magnotti, G., Barlow, R.S., and Sutton, J.A.  “Scalar Structure of Turbulent Partially-Premixed Dimethyl Ether/Air Jet Flames.” Proceedings of the Combustion Institute, 2015 35(2): 1235-1242.
  • Griffiths, R.A.C., Chen, J.H., Kolla, H., Cant, R.S., and Kollmann, W. “Three-Dimensional Topology of Turbulent Premixed Flame Interaction.” Proceedings of the Combustion Institute, 2015 35(2): 1341-1348.
  • Gruber, A., Kerstein, A.R., Valiev, D., Law, C.K., Kolla, H., and Chen, J.H. “Modeling of Mean Flame Shape During Premixed Flame Flashback in Turbulent Boundary Layers.” Proceedings of the Combustion Institute, 2015 35(2): 1485-1492.
  • Hansen, N., Braun-Unkhoff, M., Kathrotia, T., Lucassen, A., and Yang, B. “Understanding the Reaction Pathways in Premixed Flames Fueled by Blends of 1,3-Butadiene and n-Butanol.” Proceedings of the Combustion Institute, 2015 35(1): 771-778.
  • Jasper, A.W., Oana, C.M., and Miller, J.A. “‘Third-Body’ Collision Efficiencies for Combustion Modeling: Hydrocarbons in Atomic and Diatomic Baths.” Proceedings of the Combustion Institute, 2015 35(1): 197-204.
  • Jasper, A.W., and Miller, J.A. “Lennard-Jones Parameters for Combustion and Chemical Kinetics Modeling from Full-Dimensional Intermolecular Potentials.” Combustion and Flame, 161(1): 101-110.
  • Johansson, K.O., Lai, J.Y.W., Skeen, S.A., Popolan-Vaida, D.M., Wilson, K.R., Hansen, N., Violi, A., and Michelsen, H.A.  “Soot Precursor Formation and Limitations of the Stabilomer Grid.” Proceedings of the Combustion Institute, 2015 35(2): 1819-1826.
  • Jung, Y., Manin, J., Skeen, S.A., Pickett, L.M. “Measurement of liquid and vapor penetration of diesel sprays with a variation in spreading angle.” SAE Technical Paper, 09 January 2015.
  • Khalil, M., Guilhem, L., Oefelein, J.C., and Najm, H.N. “Uncertainty Quantification in LES of a Turbulent Bluff-Body Stabilized Flame.” Proceedings of the Combustion Institute, 2015 35(2): 1147-1156.
  • Krisman, A., Hawkes, E.R., Talei, M., Bhagatwala, A., and Chen, J.H. “Polybrachial Structures in Dimethyl Ether Edge-Flames at Negative Temperature Coefficient Conditions.” Proceedings of the Combustion Institute, 2015 35(1): 999-1006.
  • Lacaze, G., Misdariis, A., Ruiz, A., and Oefelein, J.C. “Analysis of High-Pressure Diesel Fuel Injection Processes Using Les with Real-Fluid Thermodynamics and Transport.” Proceedings of the Combustion Institute, 2015 35(2): 1603-1611.
  • Leermakers, C.A.J. and Musculus, M.P.B. “In-Cylinder Soot Precursor Growth in a Low-Temperature Combustion Diesel Engine: Laser-Induced Fluorescence of Polycyclic Aromatic Hydrocarbons.” Proceedings of the Combustion Institute, 2015 35(3): 3079-3086.
  • Lequien, G., Skeen, S.A., Manin, J., Pickett, L.M. “Ignition quality effects on lift-off stabilization of synthetic fuels.” SAE Technical Paper, 07 January 2015.
  • Li, T, Geier, M., Wang, L., Ku, X., Matas-Guell, B., Lovas, T., Shaddix, C.R. “Effect of torrefaction on physical properties and conversion behavior of high heating rate char of forest residue.” Energy Fuels, 2015 29: 177-184.
  • Lucassen, A., Park, S., Hansen, N., and Mani Sarathy, S. “Combustion Chemistry of Alcohols: Experimental and Modeled Structure of a Premixed 2-Methylbutanol Flame.” Proceedings of the Combustion Institute, 2015 35(1): 813-820.
  • Magnotti, G., Geyer, D., and Barlow, R.S. “Interference Free Spontaneous Raman Spectroscopy for Measurements in Rich Hydrocarbon Flames.” Proceedings of the Combustion Institute, 2015 35(3): 3765-3772.
  • Magnotti, G., Barlow, R.S. “Effects of high shear on the structure and thickness of turbulent premixed methane/air flames stabilized on a bluff-body burner.” Combust. Flame, 2015 162: 100-114.
  • Manin, J., Skeen, S.A. “Experimental characterization of DI gasoline injection processes.” JSAE, submitted (2015).
  • Meares, S., Prasad, V.N., Magnotti, G., Barlow, R.S., and Masri, A.R. “Stabilization of Piloted Turbulent Flames with Inhomogeneous Inlets.” Proceedings of the Combustion Institute, 2015 35(2): 1477-1484.
  • Michael, J.B., Venkateswaran, P., Shaddix, C.R., Meyer, T.R. “Effects of repetitive pulsing on multi-kHz planar laser-induced incandescence imaging in laminar and turbulent flames.” Applied Optics.
  • Musculus, M. “Influence of injection duration and ambient temperature on the ignition delay in a 2.34L optical diesel engine.” 2015 JSAE / SAE International Powertrains, Fuels & Lubricants Conference, September 2015.
  • Nawdiyal, A., Hansen, N., Zeuch, T., Seidel, L, and Maus, F. “Experimental and Modelling Study of Speciation and Benzene Formation Pathways in Premixed 1-Hexene Flames.” Proceedings of the Combustion Institute, 2015 35(1): 325-332.
  • Niu, Y., and Shaddix, C.R. “A Sophisticated Model to Predict Ash Inhibition during Combustion of Pulverized Char Particles.” Proceedings of the Combustion Institute, 2015 35(1): 561-569.
  • Nurkowski, D., Klippenstein, S.J., Georgievskii, Y., Verdicchio, M., Jasper, A.W., Akroyd, J., Mosbach, S., and Kraft, M.  “Ab Initio Variational Transition State Theory and Master Equation Study of the Reaction (OH)3SiOCH2 + CH3 ⇔ (OH)3SiOC2H5.” Z. Phys. Chem., 2015.
  • Pickett, L.M., Genzale, C.L., and Manin, J. “Uncertainty Quantification for Liquid Penetration of Evaporating Sprays at Diesel-Like Conditions. ” Atomization Spray, 2015.
  • Pitz, W.J., Skeen, S.A. “Chemical kinetic modeling of low-pressure methylcyclohexane flames.” Journal of Physical Chemistry, submitted (2015).
  • Reichert, M.D., Alvarez, N.J., Brooks, C.F., Griller, A.M., Mondy, L.A., Anna, S.L. and Walker, L. ”The Importance of Experimental Design on Measurement of Dynamic Interfacial Tension and Interfacial Rheology in Diffusion-Limited Surfactant Systems.” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2015: 135-142.
  • Roberts, C. “Dispersion and Solution Processes.” Materials Processing: A Unified Approach to Processing Metals, Ceramics and Polymers, 2015.
  • Rotavera, B., Scheer, A.M., Huang, H., Osborn, D.L., and Taatjes, C.A. “Influence of Temperature and Resonance-Stabilization on the Ortho-Effect in Cymene Oxidation.” Proceedings of the Combustion Institute, 2015 35(1): 543-552
  • Safta, C., Sargsyan, K., Debusschere, B.J., and Najm, H.N. “Hybrid discrete/continuum algorithms for stochastic reaction networks.” Journal of Computational Physics, 2015 281: 177-198.
  • Savee, J.D., Papajak, E., Rotavera, B., Huang, H., Eskola, A.J., Welz, O., Sheps, L., Taatjes, C.A. “Direct Observation and Kinetics of a Hydroperoxyalkyl Radical (QOOH).” Science, 2015 347(6222): 643-646.
  • Schenk, M., Hansen, N., Vieker, H., Beyer, A., Gölzhäuser, A., and Kohse-Höinghaus, K. “PAH Formation and Soot Morphology in Flames of C4 Fuels.” Proceedings of the Combustion Institute, 2015 35(2): 1761-1769.
  • Sjöberg, M. Zeng, W., and Reuss, D.L.“Combined effects of flow/spray interactions and EGR on combustion variability for a stratified DISI engine.” Proceedings of the Combustion Institute, 2015 35(3): 2907-2914.
  • Skeen, S.A., Manin, J., and Pickett, L.M. “Simultaneous Formaldehyde PLIF and High-Speed Schlieren Imaging for Ignition Visualization in High-Pressure Spray Flames.” Proceedings of the Combustion Institute, 2015 35(3): 3167-3174.
  • Skeen, S.A., Manin, J., Pickett, L.M. “Visualization of ignition processes in high-pressure sprays with multiple injections of n-dodecane.” SAE Technical Paper, 07 January 2015.
  • Steinberg, A.M., Coriton, B., and Frank, J.H. “Influence of Combustion on Principal Strain-Rate Transport in Turbulent Premixed Flames.” Proceedings of the Combustion Institute, 2015 35(2): 1287-1294.
  • Weinkauff, J., Trunk, P., Frank, J.H., Dunn, M.J., Dreizler, A., and Böhm, B. “Investigation of Flame Propagation in a Partially Premixed Jet by High-Speed-Stereo-PIV and Acetone-PLIF.” Proceedings of the Combustion Institute, 2015 35(3): 3773-3781.
  • Welz, O., Savee, J.D., Osborn, D.L., and Taatjes, C.A. “Chlorine Atom-Initiated Low-Temperature Oxidation of Prenol and Isoprenol: The Effect of C=C Double Bonds on the Peroxy Radical Chemistry in Alcohol Oxidation.” Proceedings of the Combustion Institute, 2015 35(1): 401-408.
  • Wolk, B., Chen, J.-Y., and Dec, J.E. “Computational Study of the Pressure Dependence of Sequential Autoignition for Partial Fuel Stratification with Gasoline.” Proceedings of the Combustion Institute, 2015 35.
  • Xin, Y.S., Yoo, C.S., Chen, J.H., and Law, C.K. “A DNS Study of Self-Accelerating Cylindrical Hydrogen–Air Flames with Detailed Chemistry.” Proceedings of the Combustion Institute, 2015 35(1): 753-760.
  • Zádor, J. and Miller, J.A. “Adventures on the C3H5O Potential Energy Surface: OH + Propyne, OH + Allene and Related Reactions.” Proceedings of the Combustion Institute, 2015 35(1): 181-188.
  • Zeng, W., Sjöberg, M., and Reuss, D.L. “Combined Effects of Flow/Spray Interactions and EGR on Combustion Variability for a Stratified DISI Engine.” Proceedings of the Combustion Institute, 2015, 35(3): 2907-2914.
  • Zha, K., Busch, S., Miles, P.C., Wijeyakulasuriya, S., Mitra, S., and Senecal, P.K. “Characterization of Flow Asymmetry During the Compression Stroke Using Swirl-Plane PIV in a Light-Duty Optical Diesel Engine with the Re-entrant Piston Bowl Geometry.” SAE 2015 World Congress & Exhibition, 2015.
  • Allen, J.W., Scheer, A.M., Gao, C.W., Merchant, S.S., Vasu, S.S., Welz, O., Savee, J.D., Osborn, D.L., Lee, C., Vranckx, S., Wang, Z., Qi, F., Fernandes, R.X., Green, W.H., Hadi, M.Z, and Taatjes, C.A. “A Coordinated Investigation of the Combustion Chemistry of Diisopropyl Ketone, a Prototype for Biofuels Produced by Endophytic Fungi.” Combustion and Flame, 2014 161(3): 711-724.
  • Beresh, S., Smith, B., “Spatial Error in Stereo PIV Calibration.” Experiments in Fluids, 2014.
  • Beresh, S., Kearney, S., Wagner, J., Guildenbecher, D., Henfling, J., Spillers, R., Pruett, B., Jiang, N., Slipchenko, M., Mance, J. and Roy, S. “Pulse-Burst PIV in a High-Speed Wind Tunnel.” Experiments in Fluids, 2014.
  • Bhagatwala, A., Zhaoyu L., Shen, H., Sutton, J.A., Tianfeng L., and Chen, J.H. “Direct numerical simulations of HCCI/SACI with ethanol.” Combustion and Flame, 2014 161: 1826-1841.
  • Blessinger, M., Skeen, S.A. “Quantitative mixing measurements and stochastic variability of a vaporizing gasoline direct-injection spray.” International Journal of Engine Research, 2014 16(2): 238-252.
  • Bohlin, A., and Kliewer, C.J. “Diagnostic Imaging in Flames with Instantaneous Planar Coherent Raman Spectroscopy.” Journal of Physical Chemistry Letters, 2014 5(7): 1243-1248.
  • Bohlin, A., and Kliewer, C.J. “Single-Shot Hyperspectral Coherent Raman Planar Imaging in the Range 0-4200 Cm(-1).” Applied Physics Letters, 2014 105(6).
  • Bohlin, A., and Kliewer, C.J. “Two-Beam Ultrabroadband Coherent Anti-Stokes Raman Spectroscopy for High Resolution Gas-Phase Multiplex Imaging.” Applied Physics Letters, 2014 104(3).
  • Bohlin, A., Kliewer, C.J.  “Direct Coherent Raman Temperature Imaging and Wideband Chemical Detection in a Hydrocarbon Flat Flame.” The Journal of Physical Chemistry Letters, 2014 6(4): 643-649.
  • Casper, K., Beresh, S., and Schneider, S. Reu, P. L., Sweatt, W., Miller, T., Fleming, D. “Camera System Resolution and its Influence on Digital Image Correlation.”  Experimental Mechanics 2014: 1-17Pressure Fluctuations Beneath Instability Wave Packets and Turbulent Spots in a Hypersonic Boundary Layer.” Journal of Fluid Mechanics (756) October 2014: 1058-1091.
  • Casper, K., Beresh, S., Henfling, J., Spillers, R. and Pruett, B. “Hypersonic Wind-Tunnel Measurements of Boundary-Layer Transition on a Slender Cone.” AIAA Journal, 2014.
  • Chan, W.L., Kolla, H., Chen, J.H., and Ihme, M. “Assessment of model assumptions and budget terms of the unsteady flamelet equations for a turbulent reacting jet-in-crossflow.” Combustion and Flame, 2014 161: 2601-2613.
  • Coriton, B., Steinber, A.M., and Frank, J.H. “High-speed tomographic PIV and OH PLIF measurements in turbulent reactive flows.” Experiments in Fluids, 2014 55: 1-20.
  • Dernotte, J., Dec, J.E., Ji, C., “Investigation of the Sources of Combustion Noise in HCCI Engines.” SAE Int. J. Engines, 2014: 730-761.
  • Eagle, W.E., and Musculus, M.P.B., “Cinema-Stereo Imaging of Fuel Dribble after the End of Injection in an Optical Heavy-Duty Diesel Engine.” Thiesel Conference on Thermo- and Fluid Dynamic Processes in Direct Injection Engines Valencia, September 2014.
  • Eagle, W.E., Musculus, M.P.B., Malbec, L.M., and Bruneaux, G. “Measuring transient entrainment rates of a confined vaporizing diesel jet.” Institute for Liquid Atomization and Spray Systems – Americas, Portland, OR, May 2014.
  • Egolfopoulos, F.N., Hansen, N., Ju, Y., Kohse-Hoeinghaus, K., Law, C.K., and Qi., F. “Advances and Challenges in Laminar Flame Experiments and Implications for Combustion Chemistry.” Progress in Energy and Combustion Science, 2014 43: 36-67.
  • Frank, J.H., Schavorskiy, A., Bluhm, H., Coriton, B., Huang, E., and Osborn, D.L. “In-situ soft x-ray absorption spectroscopy of flames.”  Appl. Phys. B, 2014 117: 493-499.
  • Gao, J., Guildenbecher, D. R., Engvall, L., Reu, P. L., and Chen, J. “Refinement of particle detection by the hybrid method in digital in-line holography.” Appl. Opt. 53(27): G130-G138.
  • Gruber, A., Kerstein, A.R., Valiev, D., Law, C.K., Kolla, H., and Chen, J.H. “Direct numerical simulation of laminar flame/wall  interaction for a novel H2-selective membrane/injector configuration.” Intl Journal of Hydrogen, 2014 39: 5906-5918.
  • Guildenbecher, D. R., Engvall, L., Gao, J., Grasser, T. W., Reu, P. L., and Chen, J. “Digital in-line holography to quantify secondary droplets from the impact of a single drop on a thin film.” Exp. Fluids 55(1670) 2014.
  • Guildenbecher, D. R., Cooper, M. A., Gill, W., Stauffacher, H. L., Oliver, M. S., and Grasser, T. W. “Quantitative, three-dimensional imaging of aluminum drop combustion in solid propellant plumes via digital in-line holography.” Optics Letters 2014. Accepted.
  • Hansen, N., Skeen, S.A., Michelsen, H.A., Wilson, K.R., and Kohse-Hoinghaus, K. “Flame Experiments at the Advanced Light Source: New Insights into Soot Formation Processes.” Journal of Visualized Experiments, 2014 87.
  • Han, X., Najm, H.N. “Dynamical Structures in Stochastic Chemical Reaction Systems.” SIAM J. Appl. Dyn. Systems, 2014 13: 1328-1351.
  • Jasper, A.W., Kamarchik, E., Miller, J.A., and Klippenstein, S.J. “First-Principles Binary Diffusion Coefficients for H, H-2, and Four Normal Alkanes + N-2.” Journal of Chemical Physics, 2014 141(12).
  • Jasper, A.W., and Miller, J.A. “Lennard-Jones Parameters for Combustion and Chemical Kinetics Modeling from Full-Dimensional Intermolecular Potentials.” Combustion and Flame, 161(1): 101-110.
  • Jasper, A.W., Pelzer, K.M., Miller, J.A., Kamarchik, E., Harding, L.B., and Klippenstein, S.J.  “Predictive a Priori Pressure-Dependent Kinetics.” Science, 2014 346(6214): 1212-1215.
  • Ji, C., Dec, J., Dernotte, J., and Cannella, W. “Effect of Ignition Improvers on the Combustion Performance of Regular-Grade E10 Gasoline in an HCCI Engine.” SAE Int. J. Engines, 2014: 790-806.
  • Johansson, K.O., Lai, J.Y.W., Skeen, S.A. “Soot precursor formation and limitations of the stabilomer grid.” Proceedings of the Combustion Institute, 2014 35(2): 1819-1826.
  • Kalashnikovaa, I., Baroneb, M.F., Arunajatesan, S., G. van Bloewmen Waander, B., “Construction of energy-stable projection-based reduced order models ‘Hypersonic Wind-Tunnel Measurements of Boundary-Layer Transition on a Slender Cone.” AIAA Journal, November 2014.
  • Kedia, K.S., Safta, C., Rai, J., Najm, H.N., and Ghoniem, A.F. “A second-order coupled immersed boundary-SAMR construction for chemically reacting flow over heat-conducting Cartesian grid-confirming solid.” J. Computational Physics, 2014 272: 408-428.
  • Kearney, S., “Bandwidth optimization of femtosecond pure-rotational coherent anti-Stokes Raman scattering by pump/Stokes spectral focusing.” Applied Optics, 53, 2014: 6579-6585.
  • Kearney, S., “Hybrid fs/ps rotational CARS temperature and oxygen measurements in the product gases of canonical flat flames.” Combust. Flame, 2014.
  • Kim, D., Choi, S., Geier, M., Shaddix, C.R. “Effect of CO2 Gasification Reaction on Char Particle Combustion in Oxy-fuel Conditions.” Fuel, 2014: 130-140.
  • Kolla, H., Hawkes, E.R., Kerstein, A.R., Swaminathan, N., and Chen, J.H. “On velocity and reactive scalar spectra in highly turbulent premixed flames.” Journal of Fluid Mechanics, 2014 754: 456-487.
  • Krisman, A., Hawkes, E.R., Talei, M., Bhagatwala, A., and Chen, J.H. “A DNS evaluation of mixing models for transported PDF modelling of turbulent nonpremixed flames.” Combustion and Flame, 2014 161: 2085-2106.
  • Krüger, J., Koppmann, J., Nau, P., Brockhinke, A., Schenk, M., Hansen, N., Werner, U, and Kohse-Höinghaus, K. “From Precursors to Pollutants: Some Advances in Combustion Chemistry Diagnostics.” Eurasian Chem. Technol. J., 2014 16(2-3): 91-105.
  • Lawler, B., Lacey, J., Dronniou, N., Dernotte, J., Dec, J.E., Guralp, O., Najt, P., and Filipi, Z. “Refinement and Validation of the Thermal Stratification Analysis: A post-processing methodology for determining temperature distributions in an experimental HCCI engine.” SAE, January 2014.
  • Lopez-Yglesias, X., Schrader, P.E., and Michelsen, H.A. “Soot Maturity and Absorption Cross Sections.” Journal of Aerosol Science, 2014 75: 43-64.
  • Luo, X., Yu, X., Zha, K., Jansons, M., and Soloiu, V. “In-Cylinder Wall Temperature Influence on Unburned Hydrocarbon Emissions During Transitional Period in an Optical Engine Using a Laser-Induced Phosphorescence Technique.” SAE Int. J. Engines 7(2), 2014: 995-1002.
  • Ma, B., Wang, G., Magnotti, G., Barlow, R.S., Long, M.B. “Intensity-ratio and color-ratio thin-filament pyrometry: Uncertainties and accuracy.”  Combust. Flame, 2014 161: 2849-2859.
  • Manin, J., Skeen, S. A., Pickett, L.M., Kurtz, E., Anderson, J.E. “Effects of Oxygenated Fuels on Combustion and Soot Formation/Oxidation Processes.” SAE Int.J.Fuels Lubr., 2014 7(3): 704-717.
  • Manin, J., Bardi, M., Pickett, L.M., Dahms, R.N.,  and Oefelein, J.C. “Microscopic investigation of the atomization and mixing processes of diesel sprays injected into high pressure and temperature environments.” Fuel, 2014 134: 531-543.
  • Mueller, C. “Investigation of Methyl Decanoate Combustion in an Optical Direct-Injection Diesel Engine.” Energy Fuels, 2014 28(12): 7689-7700.
  • Mueller, C. “An Experimental Study of Diesel-Fuel Property Effects on Mixing-Controlled Combustion in a Heavy-Duty Optical CI Engine.” SAE Int. J. Fuels Lubr., 2014 7(1): 65-81.
  • Mueller, C. “Fuels for Engines and the Impact of Fuel Composition on Engine Performance.” Encyclopedia of Automotive Engineering, Eds., 2014.
  • Mueller, C. “Predictions of Transient Flame Lift-Off Length with Comparison to Single-Cylinder Optical Engine Experiments.” J. Eng. Gas Turbines Power, 2014 136(11): 111505.
  • Musculus, M. “In-cylinder soot precursor growth in a low-temperature combustion diesel engine: laser-induced fluorescence of polycyclic aromatic hydrocarbons.” Proceedings of The Combustion Institute, March 2014.
  • Musculus, M. “Experimental Facilities and Measurements – Fundamentals.” Encyclopedia of Automotive Engineering, May 2014.
  • Musculus, M. “Effect of Load on Close-Coupled Post-Injection Efficacy for Soot Reduction in an Optical, Heavy-Duty Diesel Research Engine.” J. Eng. Gas Turb. Power, May 2014 136(10): 101509-101509-16.
  • Musculus, M. “In-Cylinder Mechanisms of Soot Reduction by Close-Coupled Post-Injections as Revealed by Imaging of Soot Luminosity and Planar Laser-Induced Soot Incandescence in a Heavy-Duty Diesel Engine.” SAE Int. J. Engines, July 2014 7: 673-693.
  • Musculus, M. “A CFD Study of Post Injection Influences on Soot Formation and Oxidation under Diesel-like Operating Conditions.” SAE Int. J. Engines, July 2014 7: 694-713.
  • Musculus, M. “Effects of EGR and Load on Soot in a Heavy-Duty Optical Diesel Engine with Close-Coupled Post-Injections for High Efficiency Combustion Phasing.” Int. J. Eng. Res., June 2014 15(4): 421-443.
  • Musculus, M. “Cinema-Stereo Imaging of Fuel Dribble after the End of Injection in an Optical Heavy-Duty Diesel Engine.” THIESEL 2014 Conference on Thermo- and Fluid Dynamic Processes in Direct Injection Engines, September 2014.
  • Musculus, M. “Measuring Transient Entrainment Rates of a Confined Vaporizing Diesel Jet.” ILASS Americas 26th Annual Conference on Liquid Atomization and Spray Systems, May 2014.
  • Musculus, M.P.B., Pickett, L.M., Kaiser, S.A. “Fundamentals.” Encyclopedia of Automotive Engineering, John Wiley & Sons, Ltd., 2014.
  • Najm, H.N., Berry, R.D., Safta, C., Sargsyan, K, and Debusschere, B.J. “Data-free inference of uncertain parameters in chemical models.” International Journal for Uncertainty Quantification, 2014 4: 111-112.
  • Najm, H.N., Valorani, M. “Enforcing positivity in intrusive PC-UQ methods for reactive ODE systems.” J. Computational Physics, 2014 270: 544-569.
  • Nanthaamornphong, A., Carver, J.C., Morris, K., Michelsen, H.A., and Rouson, D.W.I. “Building Cliime Via Test-Driven Development: A Case Study.” Computing in Science & Engineering, 2014 16(3): 36-46.
  • Ng, M.Y., Nelson, J., Taatjes, C.A., Osborn, D.L, and Meloni, G. “Synchrotron Photoionization Study of Mesitylene Oxidation Initiated by Reaction with Cl(P-2) or O(P-3) Radicals.” Journal of Physical Chemistry, 2014 118(21): 3735-3748.
  • Oefelein, J.C., Lacaze, G., Dahms, R.N., Ruiz, A., and Misdariis, A. “Effects of real-fluid thermodynamics on high-pressure fuel injection processes.” SAE Intl. J. Engines, 2014 7: 1125-1136.
  • Osborn, D.L., Vogelhuber, K.M., Wren, S.W., Miller, E.M., Lu, Y.-J., Case, A.S., Sheps, L., McMahon, R.J., Stanton, J.F., Harding, L.B., Ruscic, B., and Linberger, W.C. “Electronic States of the Quasilinear Molecule Propargylene (Hccch) from Negative Ion Photoelectron Spectroscopy.” Journal of the American Chemical Society, 2014 136(29): 10361-10372.
  • Pickett, L.M., Manin, J., Kastengren, A., and Powell, C. “Comparison of Near-Field Structure and Growth of a Diesel Spray Using Light-Based Optical Microscopy and X-Ray Radiography.” SAE Int.J.Engines, 2014 7(2).
  • Quan, S., Dai, M., Pomraning, E., Senecal, P.K., Richards, K., Som, S., Skeen, S., Manin, J., and Pickett, L.M. “Numerical Simulations of Supersonic Diesel Spray Injection and the Induced Shock Waves.” SAE Int.J.Engines, 2014 7(2): 1054-1060.
  • Rankin, B.A., Magnotti, G., Barlow, R.S., Gore, J.P. “Radiation intensity imaging measurements of methane and dimethyl ether turbulent nonpremixed and partially premixed jet flames.” Combust. Flame, 2014 161: 2849-2859.
  • Reu, Phillip “All about speckles: Aliasing.” Experimental Techniques 38(5) 2014: 1-3.
  • Reu, Phillip “Speckles and their relationship to the digital camera.” Experimental Techniques 38(4) 2014: 1-2.
  • Reu, Phillip “Calibration: Sanity Checks.” Experimental Techniques 38(2) 2014: 1-2.
  • Reu, Phillip “Calibration: Stereo Calibration.”  Experimental Techniques 38(1) 2014: 1-2
  • Reu, P. L., Sweatt, W., Miller, T., Fleming, D. “Camera System Resolution and its Influence on Digital Image Correlation.”  Experimental Mechanics, 2014: 1-17
  • Reu, Phillip “Camera system resolution and its influence on digital image correlation.” Experimental Mechanics. Accepted.
  • Reitz, R.D., Pickett, L.M., and Trujillo, M. “Fuel Introduction.” Encyclopedia of Automotive Engineering, John Wiley & Sons, Ltd., 2014.
  • Roberts, S.A., Brunini, V.E., Long, K.N. and Grillet, A.M. ”A Framework for Three-Dimensional Mesoscale Modeling of Anisotropic Swelling and Mechanical Deformation in Lithium-Ion Electrodes.” Journal of the Electrochemical Society, 161(11), 2014: F3052-F3059.
  • Roberts, C. “Drop Mass Transfer in a Microfluidic Chip Compared to a Centrifugal Contactor” AICHE J., 60(8), 2014: 3071.
  • Roberts, C. “Circulation within confined droplets in Hele-Shaw Channels.” Phys Fluids, 26, 2014: 032105.
  • Roeterdink, W. G., Bulthuis, J., Lee, E.P.F., Ding, D., and Taatjes, C.A. “Hexapole Transmission Spectrum of Formaldehyde Oxide.” Chemical Physics Letters, 2014 598: 96-101.
  • Rotavera, B., Zador, J., Welz, O., Sheps, L., Scheer, A.M., Savee, J.D., Ali, M.A., Lee, T.S., Simmons, B.A., Osborn, D.L., Violi, A., and Taatjes, C.A. “Photoionization Mass Spectrometric Measurements of Initial Reaction Pathways in Low-Temperature Oxidation of 2,5-Dimethylhexane.” Journal of Physical Chemistry, 2014 118(44): 10188-10200.
  • Sai, N., Leung, K., Zádor, J., Graeme, H. “First principles study of photo-oxidation degradation mechanisms in P3HT for organic solar cells.” Physical Chemistry Chemical Physics, 2014 16: 8092-8099.
  • Sarathy, S.M., Osswald, P., Hansen, H., and Kohse-Hoeinghaus, K. “Alcohol Combustion Chemistry.” Progress in Energy and Combustion Science, 2014 44: 40-102.
  • Sargsyan, K., Safta, C., Najm, H.N., Debusschere, B.J., Ricciuto, D., and Thornton, P. “Dimensionality reduction for complex models via Bayesian compressive sensing.” International Journal for Uncertainty Quantification, 2014 4: 63-93.
  • Sayer, R. “Generalized Procedure for Improved Accuracy of Thermal Contact Resistance Measurements for Materials with Arbitrary Temperature-Dependent Thermal Conductivity.” Heat Transfer Engineering 36, 2014: 433-438.
  • Sayer, R. “Thermal Contact Conductance as a Method of Rectification in Bulk Materials.” Heat Transfer Research.
  • Sayer, R. A., S. L. Hodson, T. P. Koehler, R. J. Cordova, T. C. Marinone, J. R. Serrano and T. S. Fisher. “Characterization of Gamma-Irradiated Carbon Nanotube and Metallic Foil Thermal Interface Materials for Space Systems.” International Journal of Micro-Nano Scale Transport, 5: 81-94
  • Scheer, A.M., Welz, O., Zador, J., Osborn, D.L., and Taatjes, C.A. “Low-Temperature Combustion Chemistry of Novel Biofuels: Resonance-Stabilized Qooh in the Oxidation of Diethyl Ketone.” Physical Chemistry Chemical Physics, 2014 16(26): 13027-13040.
  • Schiemann, M., Geier, M., Shaddix, C.R., Vorobiev, N., Scherer, V. “Determination of char combustion kinetics parameters: Comparison of point detector and imaging-based particle-sizing pyrometry.” Review of Scientific Instruments, 2014 85.
  • Shallcross, D.E., Taatjes, C.A., and Percival, C.J. “Criegee Intermediates in the Indoor Environment: New Insights.” Indoor Air, 2014 24(5): 495-502.
  • Sheps, L., Scully, A.M., and Au, K. “Uv Absorption Probing of the Conformer-Dependent Reactivity of a Criegee Intermediate Ch3choo.” Physical Chemistry Chemical Physics, 2014 16(48): 26701-26706.
  • Sjöberg, M. Zeng, W., and Reuss, D.L. “Role of Engine Speed and In-cylinder Flow Field for Stratified and Well-mixed DISI Engine Combustion using E70.” SAE Int. J. Engines, 2014 7(2).
  • Sjöberg, M. Zeng, W., and Reuss, D.L.“Using PIV Measurements to Determine the Role of the In-cylinder Flow Field for Stratified DISI Engine Combustion.” SAE Int. J. Engines, 2014 7(2).
  • Sjöberg, M., Wei, Z., Singleton, D., Sanders, J.M., and Gundersen, M.A., “Combined Effects of Multi-Pulse Transient Plasma Ignition and Intake Heating on Lean Limits of Well-Mixed E85 DISI Engine Operation.” SAE Int. J. Engines, 2014 (7)4: 1781-1801.
  • Skeen, S.A., Manin, J., Pickett, L.M. “Simultaneous formaldehyde PLIF and high-speed schlieren imaging for ignition visualization in high-pressure spray flames.” Proceedings of the Combustion Institute, 2014 35(3): 3167-3174.
  • Skeen, S.A., Manin, J., Dalen, K., Ivarsson, A., Pickett, L.M. “Quantitative spatially resolved measurements of total radiation in high-pressure spray flames.” SAE Technical Paper, 12 January 2014.
  • Skeen, S., Manin, J., Pickett, L.M., Dalen, K., and Ivarsson., A. “Quantitative Spatially Resolved Measurements of Total Radiation in High-Pressure Spray Flames.” SAE, 2014.
  • Taatjes, C.A., Shallcross, D.E., and Percival, C.J. “Atmospheric Chemistry Intermediates Just Want to React.” Nature Chemistry, 2014 6(6): 461-462.
  • Taatjes, C.A., Shallcross, D.E., and Percival, C.J.”Research Frontiers in the Chemistry of Criegee Intermediates and Tropospheric Ozonolysis.” Physical Chemistry Chemical Physics, 2014 16(5): 1704-1718.
  • Wagner, J., Casper, K., Pruett, B., Henfling, J. and Spillers, R. “Experimental Investigation of Fluid-Structure Interactions in Compressible Cavity Flows.” Physics of Fluids, 2014.
  • Wagner, J., Casper, K., Beresh, S., Henfling, J., Spillers, R. and Pruett, B. “Mitigation of Wind Tunnel Wall Interactions in Subsonic Cavity Flows.” Experiments in Fluids, 2014.
  • Wagnild, R. and Gallis, M., “Continuum Simulation of Hypersonic Flows Using the Quantum-Kinetic Chemical Reaction Model.” Physics of Fluids.
  • Welz, O., Eskola, A.J., Sheps, L., Rotavera, B., Savee, J.D., Scheer, A.M., Osborn, D.L., Lowe, D., Booth, A.M., Xiao, P., Anwar, M., Khan, H., Percival, C.J., Shallcross, D.E., and Taatjes, C.A. “Rate Coefficients of C1 and C2 Criegee Intermediate Reactions with Formic and Acetic Acid near the Collision Limit: Direct Kinetics Measurements and Atmospheric Implications.” Angewandte Chemie-International, 2014 53(18): 4547-4550.
  • Wyatt, N.B. and Grillet, A.M. “Rheology, adhesion, and debonding mechanisms in fluorosilicone polymer gels.” Journal of Applied Polymer Science, 131(6), 2014: 40034
  • Yang, Y. and Dec, J. E. “Bio-Ketones:  Autoignition Characteristics and Their Potential as Fuels for HCCI Engines.” SAE Int. J. Fuels Lubr., 2013 6(3): 713-728.
  • Zeng, Wei, Sjöberg, M., and Reuss, D.L., “PIV Examination of Spray-Enhanced Swirl Flow for Combustion Stabilization in a Spray-Guided Stratified-Charge DISI Engine.” International Journal of Engine Research, 2014.
  • Yang, Y. and Dec, J. E. “Bio-Ketones:  Autoignition Characteristics and Their Potential as Fuels for HCCI Engines.” SAE Int. J. Fuels Lubr., 2013 6(3): 713-728.